Jeep Wrangler 3.6 Oil Capacity (2012-Present)

Jeep Wrangler has different models with different engine capacities. From the year 1986 to the present times, the oil capacity and oil type of Jeep Wrangler have changed. It is absolutely necessary to know your Jeep wrangler 3.6 Oil capacity. So, what is the oil capacity of Jeep Wrangler 3.6?

Jeep Wrangler 3.6 Oil Capacity

The oil capacity of Jeep Wrangler 3.6 depends on the model. The models of 2012 to 2017 Jeep Wrangler JK 3.6L V6 engine have an engine oil capacity of 6 Quarts or 5.58 liters. The models from 2018 to 2022 Jeep Wrangler JL 3.6L V6 have an engine oil capacity of 5 Quarts or 4.73 Liters.

Even though the engine oil capacity of different models of Jeep Wrangler is the same, there are some differences in each type of engine. The viscosity of the oil type differentiates between these models. Also, you might wonder if more oil capacity makes the vehicle better. In this blog post, I’ll try to provide detailed information on the oil capacities of the Jeep Wrangler 3.6L V6.

Jeep Wrangler 3.6L Oil Capacity

Jeep has been producing the Jeep Wrangler 3.6L V6 since 2012. Before that, Jeep Wranglers used to be of different engine capacities. Different models of Jeep Wrangler have different oil capacities.

The engine oil capacity largely depends on the engine capacity. Since we’re discussing the 3.6L V6 engines, there are also differences in oil capacity.

Jeep Wrangler 3.6L V6 JK from the year 2012 to 2017 has an engine oil capacity of 6 Quarts or 5.58 Liters. These are the third-generation Jeep wranglers.

Models onwards, from 2018 to 2022, the Jeep Wrangler 3.6L V6 JK models have an engine oil capacity of 5 Quarts or 4.73 Liters. These are the fourth-generation Jeep Wranglers.

But the term oil capacity itself is not clear enough to provide precise information. It includes Engine oil capacity, automatic transmission oil capacity, manual transmission oil capacity, Front and rear differential oil capacity, and transfer case oil capacity.

In the later section of this article, I’ll try to cover all these types of oil capacities in different models of Jeep Wrangler 3.6L 6-cylinder.

Oil Capacity Of 2022 Jeep Wrangler 3.6L

The 2022 Jeep Wrangler has different engine oil capacities depending on the engine options. The engine capacity of 3.6L 6-cylinder ERC and ERG has an engine oil capacity of 5 quarts or 4.73 Liters.

The total automatic transmission oil capacity of the 2022 Jeep Wrangler 3.6L is 9.5 Quarts or around 9 Liters. The manual transmission oil capacity is about 4.6 quarts or 4.5 liters.

2021 Jeep Wrangler 3.6L Oil Capacity

The 2021 Jeep Wrangler 3.6L engine has an oil capacity of 5 Quarts or 4.73 liters. It’s quite similar to that of the 2022’s model.

The automatic transmission oil and the manual transmission oil capacity are also the same, 9.5 quarts and 4.6 quarts respectively.

Oil Capacity Of 2020 Jeep Wrangler 3.6L Engine

The Engine oil capacity of the 2020 Jeep Wrangler 3.6L is 5 Quarts or 4.73 liters. It is the same for both the ERC and ERG engine options.

For the automatic transmission type 8-speed 8HP50, the automatic transmission oil capacity is 9.5 Quarts or 9 Liters.

For AL6 6-speed manual transmission, the oil capacity is 4.6 Quarts.

Oil Capacity Of 2019 Jeep Wrangler 3.6L

The 6-cylinder, 3.6L 2019 Jeep Wrangler has the same oil capacity as the newest ones of this category, about 5 Quarts or 4.73 liters.

The automatic transmission oil capacity is 9 quarts, slightly lower than the latest models. The manual transmission oil capacity matches the newer versions, 4.6 quarts.

2018 Jeep Wrangler 3.6L Oil Capacity

2018 Jeep Wrangler 3.6L has an oil capacity of 5 Quarts or 4.73 liters. The automatic transmission oil and the manual transmission oil capacity is as the same as the 2019’s model.

The transfer case oil capacity depends on the transfer case type. If it’s an MP1622, the oil capacity is about 1.6 liters and for the MP3022, it’s 1.7 liters.

Jeep Wrangler 3.6L  2012-2017 Oil Capacity

The engine oil capacity of the generation 2012 to 2017 Jeep Wrangler 3.6L is slightly higher than the newer generation of Jeep Wrangler (2018-Present).

The 2012-2015 Jeep Wrangler 3.6L has an engine oil capacity of almost 6 Quarts or 5.7 Liters. The automatic transmission oil capacity is 8.1 Quarts or 7.67 Liters and the manual transmission oil capacity of 3.2 Quarts.

The 2016 and the 2017 Jeep Wrangler 3.6L JK has an oil capacity of 5.9 Quarts or 5.6 liters.

Which Jeep Wrangler Has The Highest Oil Capacity?

From the information I have provided above, you can notice the changes in engine oil capacity in different models of Jeep Wrangler 3.6L.

The fourth generation Jeep Wrangler JL 3.6L 6-cylinder has a slightly lower engine oil capacity than the third generation Jeep Wrangler 3.6L JK models.

Here’s a table to sum it all up for you:

Jeep Wrangler ModelsEngine Oil Capacity (Imperial)Engine Oil Capacity (Metric)
2022 Jeep Wrangler JL 3.6L5 Quarts4.73 Liters
2021 Jeep Wrangler JL 3.6L5 Quarts4.73 Liters
2020 Jeep Wrangler JL 3.6L5 Quarts4.73 Liters
2019 Jeep Wrangler JL 3.6L5 Quarts4.73 Liters
2018 Jeep Wrangler JL 3.6L5 Quarts4.73 Liters
2017 Jeep Wrangler JK 3.6L5.9 Quarts5.58 Liters
2016 Jeep Wrangler JK 3.6L5.9 Quarts5.58 Liters
2015 Jeep Wrangler JK 3.6L6 Quarts5.7 Liters
2014 Jeep Wrangler JK 3.6L6 Quarts5.7 Liters
2013 Jeep Wrangler JK 3.6L6 Quarts5.7 Liters
2012 Jeep Wrangler JK 3.6L6 Quarts5.7 Liters

From the table, you can clearly see that the models from 2012-2015, third Generation Jeep Wrangler 3.6L JK have the highest oil capacity.

Why Is It Important To Know The Oil Capacity Of Your Jeep Wrangler?

When your Jeep Wrangler is at its proper level, the oil capacity refers to the maximum amount of oil your vehicle can hold. Before buying a vehicle, you should always check its engine oil capacity.

There are various reasons why you should have a clear idea of the engine oil capacity of your Jeep Wrangler.

When you use the right amount of engine oil in your Jeep Wrangler, it’ll help your engine to work efficiently. It’ll provide proper lubrication and ensure your engine has a longer lifespan.

There’s another reason you should know about the engine oil capacity. You would be able to fill it to the right level. If you fill an engine with more oil than its capacity, it’ll put extra pressure on the gasket and seals.

Using too much oil can also lead to foam formation. It makes the engine less efficient.

Similarly, if you don’t put enough oil in the engine, it’ll damage the engine by overheating and increasing friction.

So, it’s necessary for you to have an idea of the engine oil capacity of your jeep Wrangler. It’ll prevent any damage, overload, and overheating in your engine.

Is More Oil Capacity In Jeep Wrangler Better?

Here’s the tricky part. You don’t necessarily need more oil capacity in your Jeep Wrangler to get better performance. Manufacturers optimize the engine with its oil capacity to perform at the highest level.

In fact, using more oil than the specified requirement creates more hassle than benefit. Overfilling an engine can cause the oil to come in contact with the crankshaft, which causes frothing or foaming.

So, having more oil capacity in your Jeep Wrangler is not better. It essentially doesn’t provide the required lubrication level and risks the long-term health of your engine.

Best Oil Type To Use In Different Models Of Jeep Wrangler 3.6L

It’s essential to follow Chrysler MS-6395 specifications for oil and viscosity to gain the optimal performance of your Jeep Wrangler’s engine.

For the Jeep Wrangler 3.6L (2012–2017), I’d recommend motor oil with a viscosity of SAE 5W-20.

And for the Jeep Wrangler 3.6L (2018–2022), my suggestion would be to use motor oil with a viscosity of SAE 0W-20.

The following oils match this oil type mentioned above: 

ModelJeep Wrangler 3.6L (2012-2017)Jeep Wrangler 3.6L (2018-2022)
Motor Oil suggestionMobil 1™ 5W-20Mobil 1™ Advanced Fuel Economy 0W-20
Valvoline Full Synthetic High Mileage MaxLife 5W-20Valvoline™ Full Synthetic High Mileage with MaxLife™ Technology SAE 0W-20
Pennzoil Platinum Full Synthetic SAE 5W-20.Pennzoil Platinum Full Synthetic SAE 0W-20

Can You Use Thicker Oil In A Jeep Wrangler 3.6?

No, I don’t suggest you to use thicker oil in a Jeep Wrangler 3.6.

Thicker motor oil implies oil with a higher viscosity. All the engines come with the proper viscosity specification of oil, which they require to run at maximum efficiency.

Using thicker oil than the specified one will create an issue with oil circulation as the manufacturer made the engine with a thinner viscosity in mind.

As a result, the thicker oil will reduce the efficiency of your fuel, starve your engine, and increase drag and damage in your engine.

Conclusion

Jeep Wrangler 3.6 Oil Capacity differs from model to model. The third-generation Jeep Wrangler JK (2012-2017) has more oil capacity compared to the fourth-generation Jeep Wrangler JL (2018-2022).

You can find more specific and detailed information in the user guide of your Jeep Wrangler. Keep in mind that the engine with more oil capacity will not necessarily perform better. Make sure you use the right type of oil in the proper amount. 

Leave a Comment